Tasmania Driving Permit Test Quiz 05

Understanding warning lights and indicators is crucial for safe driving, as they provide essential information about the vehicle’s condition. In Tasmania, drivers must be aware of the various warning lights that can illuminate on their dashboard, as each light serves a specific purpose. For instance, a warning light indicating low oil pressure can signal a serious issue that requires immediate attention, as neglecting it could lead to engine failure. Similarly, a battery warning light may indicate that the vehicle’s charging system is malfunctioning, which could leave the driver stranded. When interpreting these indicators, it is important to consider the context in which they appear. For example, if a driver sees a warning light while driving in a remote area of Tasmania, they must assess whether it is safe to continue driving or if they should pull over and investigate the issue. Additionally, understanding the difference between warning lights that require immediate action and those that may indicate a minor issue is vital for effective vehicle management. In this question, the scenario presented will test the candidate’s ability to recognize the implications of a specific warning light and make an informed decision based on that understanding.

In Tasmania, as in many regions, safety measures while driving are paramount to ensure the well-being of all road users. One critical aspect of driving safety is the use of seat belts. Seat belts are designed to secure occupants in their seats during a collision, significantly reducing the risk of injury or death. In the scenario presented, the driver is faced with a situation where they must decide whether to buckle up before starting their journey. The correct choice emphasizes the importance of proactive safety measures, as wearing a seat belt is not just a legal requirement but a fundamental practice that can save lives. Moreover, the question highlights the need for drivers to be aware of their responsibilities, not only for their safety but also for the safety of passengers. The other options present plausible alternatives that might seem reasonable at first glance, such as assuming that the car’s safety features are sufficient or that the journey is too short to warrant buckling up. However, these misconceptions can lead to dangerous outcomes. Understanding the rationale behind safety measures, such as the necessity of wearing seat belts regardless of the journey length or vehicle safety features, is crucial for responsible driving. This question tests the candidate’s ability to critically evaluate safety practices and make informed decisions based on established driving principles.

When driving in Tasmania, understanding how to handle different road conditions is crucial for safety and effective vehicle control. One common scenario involves navigating through wet or slippery roads, which can significantly affect traction and stopping distances. In such conditions, it is essential to reduce speed and increase following distances to allow for longer stopping times. Additionally, drivers should be aware of the potential for hydroplaning, where water builds up between the tires and the road surface, leading to a loss of control. In this context, the correct response to a situation where a driver encounters a sudden rainstorm while driving on a rural Tasmanian road is to adjust their driving behavior accordingly. This includes not only reducing speed but also being cautious of other drivers who may not be as prepared for the change in conditions. Furthermore, understanding the importance of using headlights in low visibility situations is vital, as it helps improve visibility for both the driver and other road users. The question presented will test the candidate’s ability to apply their knowledge of safe driving practices in adverse weather conditions, emphasizing the importance of critical thinking and situational awareness.

In Tasmania, the licensing process is structured to ensure that all drivers are adequately prepared for the responsibilities of operating a vehicle. The process typically involves several stages, including obtaining a learner’s permit, progressing to a provisional license, and finally achieving a full license. Each stage has specific requirements, such as age restrictions, the need for supervised driving hours, and passing both theoretical and practical driving tests. Understanding these requirements is crucial for prospective drivers, as it ensures they are aware of the necessary steps and can plan their learning and practice accordingly. Additionally, the licensing process is designed to promote safe driving habits and reduce the likelihood of accidents on the road. Candidates must also be aware of the implications of failing to meet these requirements, which can lead to delays in obtaining a license or additional penalties. Therefore, a nuanced understanding of the licensing process, including the specific conditions and stages involved, is essential for anyone preparing for the Tasmania Driving Permit Test.

Environmental awareness is crucial for drivers, especially in regions like Tasmania, where unique ecosystems and wildlife are present. Understanding how driving behaviors impact the environment can help reduce pollution and protect local habitats. For instance, excessive idling contributes to air pollution and fuel wastage, while driving at high speeds can increase fuel consumption and emissions. Additionally, being aware of wildlife crossings and the potential for animal collisions is vital in Tasmania, where native species are often at risk. Drivers should also consider the effects of their vehicle maintenance on the environment, such as ensuring that their cars are not leaking fluids that could contaminate local waterways. By adopting eco-friendly driving practices, such as carpooling, using public transport, or maintaining a steady speed, drivers can significantly reduce their carbon footprint. This question tests the understanding of how specific driving behaviors can influence environmental health and the importance of being mindful of one’s impact on the surroundings.

In Tasmania, understanding local traffic laws is crucial for safe driving and compliance with regulations. One important aspect is the use of roundabouts, which are common in many areas, including urban and rural settings. The rules governing roundabouts dictate that vehicles already in the roundabout have the right of way over those entering. This means that if you are approaching a roundabout, you must yield to any traffic that is already circulating within it. This rule helps to maintain a smooth flow of traffic and reduces the likelihood of collisions. Additionally, drivers must signal their intentions when exiting the roundabout to inform other road users of their actions. Failing to yield appropriately or not signaling can lead to confusion and accidents. Understanding these nuances is essential for new drivers, as it requires not only knowledge of the rules but also the ability to assess traffic conditions and make safe decisions. This question tests the candidate’s ability to apply their knowledge of local traffic laws in a practical scenario, ensuring they can navigate roundabouts safely and effectively.

Distractions while driving can significantly impair a driver’s ability to operate a vehicle safely. In Tasmania, as in many places, it is crucial for drivers to maintain focus on the road and their surroundings. Distractions can come from various sources, including mobile devices, passengers, and even external stimuli such as billboards or other vehicles. The question presented here revolves around a scenario where a driver is faced with multiple potential distractions. Understanding how to prioritize attention and manage these distractions is essential for safe driving. The correct answer emphasizes the importance of minimizing distractions before they occur, which is a proactive approach to driving safety. The other options, while plausible, suggest reactive or less effective strategies that may not adequately address the risks associated with distractions. This question tests the candidate’s ability to analyze a situation and determine the best course of action to ensure safety on the road.

When approaching a turn, especially in urban areas like Hobart, Tasmania, it is crucial to signal your intentions clearly to other road users. Signaling not only informs other drivers of your intended direction but also enhances safety by reducing the likelihood of misunderstandings. The act of signaling should begin well in advance of the turn, typically at least 30 meters before the intersection, allowing sufficient time for other drivers and pedestrians to react. Additionally, it is important to check mirrors and blind spots before initiating the turn to ensure that the path is clear. In Tasmania, the road rules emphasize the importance of signaling when turning left or right, as well as when changing lanes. Failure to signal can lead to confusion and potential accidents, as other drivers may not anticipate your movement. Moreover, understanding the correct use of indicators is essential; for instance, using the right indicator when turning right and the left indicator when turning left. This question tests the candidate’s ability to apply these principles in a practical scenario, ensuring they recognize the importance of signaling in maintaining road safety and compliance with local traffic laws.

Before driving, it is crucial to conduct a series of pre-driving checks to ensure the vehicle is safe and roadworthy. These checks include inspecting the vehicle’s lights, brakes, tires, and mirrors, as well as ensuring that the seatbelt is functioning properly. In Tasmania, where road conditions can vary significantly, especially in rural areas, these checks become even more important. For instance, ensuring that the tires have adequate tread depth is essential for maintaining traction on wet or uneven surfaces, which are common in Tasmania’s diverse landscapes. Additionally, checking that all lights are operational helps prevent accidents, particularly during low visibility conditions such as fog or rain, which are frequent in the region. Furthermore, adjusting mirrors and ensuring that the seatbelt is secure not only enhances the driver’s visibility but also significantly increases safety in the event of a collision. By understanding the importance of these checks, drivers can better prepare themselves for the road, reducing the likelihood of accidents and ensuring compliance with local regulations.

Understanding dashboard indicators is crucial for safe driving, as they provide essential information about the vehicle’s status and performance. Each indicator serves a specific purpose, alerting the driver to potential issues that may require immediate attention. For instance, the check engine light can indicate a range of problems, from minor issues like a loose gas cap to more serious engine malfunctions. Recognizing these indicators and knowing how to respond is vital for maintaining vehicle safety and performance. In Tasmania, where road conditions can vary significantly, being aware of your vehicle’s health can prevent breakdowns and accidents. Drivers should not only be familiar with the symbols but also understand the implications of each warning. For example, a low oil pressure warning could lead to engine failure if ignored, while a tire pressure warning might affect handling and fuel efficiency. Therefore, it’s important to regularly check dashboard indicators and take appropriate action based on their signals, ensuring a safer driving experience.

In Tasmania, as in many regions, understanding the practical aspects of driving is crucial for passing the driving permit test. One of the key components of practical driving is the ability to navigate various road situations safely and effectively. This includes understanding how to respond to different traffic signs, signals, and road markings, as well as the behavior of other road users. The scenario presented in the question emphasizes the importance of situational awareness and decision-making skills while driving. It requires candidates to think critically about the implications of their actions in a real-world context, rather than simply recalling rules or definitions. The correct answer reflects a comprehensive understanding of safe driving practices, particularly in relation to yielding to pedestrians and the responsibilities of drivers in urban environments. This question also highlights the necessity of being proactive and cautious, especially in areas where pedestrians are likely to be present, such as near schools or shopping centers. By analyzing the options, candidates can better appreciate the nuances of driving behavior and the importance of adhering to traffic regulations to ensure the safety of all road users.

Understanding cultural and social responsibilities while driving is crucial for maintaining safety and respect on the roads. In Tasmania, as in many places, drivers must be aware of the diverse communities they share the road with. This includes recognizing the importance of respecting local customs, being considerate of vulnerable road users such as pedestrians and cyclists, and understanding the impact of their driving behavior on the environment and society. For instance, driving at excessive speeds in residential areas can endanger children and families, while failing to yield to pedestrians can reflect a disregard for community safety. Moreover, being aware of the cultural significance of certain areas, such as Aboriginal heritage sites, can influence how drivers approach these locations. This question tests the candidate’s ability to apply their understanding of these responsibilities in a practical scenario, emphasizing the importance of empathy and awareness in driving behavior.

Maneuvering techniques are crucial for safe driving, especially in complex environments like urban areas in Tasmania. One of the key aspects of maneuvering is understanding how to execute turns safely and effectively. When approaching a turn, drivers must consider the speed of their vehicle, the angle of the turn, and the presence of other road users, including pedestrians and cyclists. A common mistake is to underestimate the turning radius required for larger vehicles or to misjudge the timing of the turn, which can lead to dangerous situations. Additionally, drivers must be aware of the road conditions, such as wet or slippery surfaces, which can affect their ability to control the vehicle during a turn. In Tasmania, where winding roads and varying terrain are prevalent, mastering these techniques is essential for maintaining safety and ensuring smooth traffic flow. Understanding the nuances of maneuvering, such as the appropriate use of indicators and the need for situational awareness, is vital for all drivers. This question tests the candidate’s ability to apply their knowledge of maneuvering techniques in a real-world scenario, emphasizing critical thinking and situational assessment.

In this scenario, we are tasked with calculating the stopping distance of a vehicle traveling at a certain speed. The stopping distance can be calculated using the formula: $$ d = \frac{v^2}{2a} $$ where: – \( d \) is the stopping distance, – \( v \) is the initial speed of the vehicle, – \( a \) is the deceleration (negative acceleration). In Tasmania, the typical deceleration for a car under emergency braking conditions is approximately \( 7 \, \text{m/s}^2 \). If a driver is traveling at a speed of \( 72 \, \text{km/h} \), we first need to convert this speed into meters per second: $$ v = 72 \, \text{km/h} \times \frac{1000 \, \text{m}}{1 \, \text{km}} \times \frac{1 \, \text{h}}{3600 \, \text{s}} = 20 \, \text{m/s} $$ Now, substituting the values into the stopping distance formula: $$ d = \frac{(20 \, \text{m/s})^2}{2 \times 7 \, \text{m/s}^2} = \frac{400 \, \text{m}^2/\text{s}^2}{14 \, \text{m/s}^2} \approx 28.57 \, \text{m} $$ Thus, the stopping distance for a vehicle traveling at \( 72 \, \text{km/h} \) under emergency braking conditions in Tasmania is approximately \( 28.57 \, \text{m} \).

When driving in Tasmania, understanding the nuances of practical driving skills is crucial for ensuring safety and compliance with local traffic laws. One of the key aspects of practical driving is the ability to judge distances accurately, especially when navigating through tight spaces or when parking. This skill is essential not only for avoiding collisions but also for ensuring that you can maneuver your vehicle safely in various environments, such as urban areas with heavy traffic or rural roads with limited visibility. In this scenario, the driver must assess the distance between their vehicle and the parked car while also considering the width of the road and the presence of pedestrians. A common mistake is to underestimate the space required for safe maneuvering, which can lead to accidents or damage to vehicles. Additionally, understanding the dynamics of vehicle movement, such as turning radius and the effect of speed on stopping distance, plays a significant role in practical driving skills. The question presented will challenge the candidate to apply their understanding of these concepts in a real-world scenario, requiring them to think critically about the best course of action based on their assessment of the situation.

Understanding vehicle operation and control is crucial for safe driving, especially in varying conditions. In Tasmania, where weather can change rapidly, drivers must be adept at adjusting their vehicle’s operation to maintain control. This includes recognizing the importance of speed management, steering techniques, and the use of vehicle features such as anti-lock braking systems (ABS) and traction control. For instance, when approaching a slippery road, a driver should reduce speed and avoid sudden maneuvers to prevent skidding. Additionally, understanding how to respond to different road conditions, such as gravel or wet surfaces, is essential. The ability to anticipate how the vehicle will react under various circumstances can significantly reduce the risk of accidents. This question tests the candidate’s ability to apply their knowledge of vehicle control in a practical scenario, emphasizing the importance of adapting driving techniques to ensure safety.

Before driving, it is crucial to conduct a series of basic checks to ensure the vehicle is safe and roadworthy. These checks include inspecting the tires for proper inflation and tread depth, ensuring that all lights are functioning correctly, checking fluid levels (such as oil, coolant, and brake fluid), and confirming that mirrors are adjusted for optimal visibility. In Tasmania, where road conditions can vary significantly, especially in rural areas, these checks become even more vital. A well-maintained vehicle not only enhances safety for the driver and passengers but also for other road users. Neglecting these checks can lead to mechanical failures, accidents, or even legal repercussions. Understanding the importance of these checks and being able to identify potential issues before hitting the road is essential for any responsible driver. This knowledge not only contributes to personal safety but also reflects a commitment to road safety standards in Tasmania.

Traffic lights are a fundamental aspect of road safety and traffic management, and understanding their meanings is crucial for all drivers. In Tasmania, as in many places, traffic lights operate on a standard color system: red, yellow, and green. A red light indicates that vehicles must stop and not proceed until the light turns green. A yellow light serves as a warning that the light is about to change to red, and drivers should prepare to stop if it is safe to do so. A green light means that vehicles may proceed through the intersection. However, the nuances of these signals can lead to confusion, especially in situations where a driver must make quick decisions. For instance, if a driver approaches an intersection and sees a yellow light, they must assess their speed and distance from the stop line to determine whether to stop or continue through the intersection. This decision-making process is critical, as running a red light can lead to severe accidents. Additionally, understanding the implications of each light in various scenarios, such as pedestrian crossings or emergency vehicle approaches, is essential for safe driving. This question tests the candidate’s ability to interpret traffic light signals in a practical context, emphasizing the importance of situational awareness and critical thinking in driving.

Speed limit signs are crucial for maintaining road safety and ensuring that drivers adhere to the regulations set by local authorities. In Tasmania, speed limits are typically indicated in kilometers per hour (km/h) and can vary based on the type of road, the presence of pedestrians, and specific conditions such as school zones or construction areas. Understanding the implications of these signs is essential for safe driving. For instance, a driver may encounter a speed limit sign indicating 50 km/h in an urban area, which is designed to protect pedestrians and reduce the risk of accidents. Conversely, a sign indicating 100 km/h on a highway allows for faster travel but requires drivers to be more vigilant due to higher speeds and potential hazards. It is also important to recognize that speed limits can change based on the time of day or specific events, such as school hours. Therefore, drivers must remain attentive to these signs and adjust their speed accordingly, as failing to do so can result in penalties or accidents. This question tests the understanding of speed limit signs and their implications in real-world driving scenarios.

Reducing emissions is a critical aspect of modern driving practices, especially in regions like Tasmania, where environmental conservation is a priority. Emissions from vehicles contribute significantly to air pollution and climate change, making it essential for drivers to understand how their choices impact the environment. One effective way to reduce emissions is by adopting eco-friendly driving habits, such as maintaining a steady speed, avoiding rapid acceleration and braking, and ensuring that the vehicle is well-maintained. Additionally, the choice of vehicle plays a crucial role; electric and hybrid vehicles typically produce fewer emissions compared to traditional gasoline-powered cars. Understanding the implications of these choices not only helps in reducing one’s carbon footprint but also aligns with local regulations aimed at promoting sustainable driving practices. In Tasmania, where the natural landscape is a significant part of the identity, reducing emissions is not just a personal responsibility but a communal one, ensuring that future generations can enjoy the pristine environment. Therefore, drivers must be equipped with the knowledge to make informed decisions that contribute to emission reduction.

Driving on gravel and unpaved roads presents unique challenges that require a nuanced understanding of vehicle handling and road conditions. In Tasmania, where such roads are common, it is crucial for drivers to adapt their driving techniques to ensure safety. One of the primary concerns on gravel roads is traction. Unlike paved surfaces, gravel can be loose and uneven, which can lead to a loss of control if a driver is not cautious. Drivers should reduce their speed significantly when navigating these roads, as higher speeds can increase the risk of skidding or losing control, especially when encountering sharp turns or sudden obstacles. Additionally, it is important to maintain a safe following distance, as gravel can cause vehicles to kick up dust, reducing visibility for both the driver and any vehicles behind them. Furthermore, understanding the vehicle’s dynamics on gravel is essential; for instance, sudden steering or braking can lead to fishtailing or rolling over. Drivers should also be aware of the potential for wildlife crossing, particularly in rural Tasmania, where animals may be more active near unpaved roads. Overall, a combination of reduced speed, increased awareness, and careful vehicle handling is vital for safe navigation on gravel and unpaved roads.

Reducing emissions is a critical aspect of modern driving practices, especially in regions like Tasmania, where environmental conservation is a priority. Emissions from vehicles contribute significantly to air pollution and climate change, making it essential for drivers to adopt practices that minimize their carbon footprint. One effective way to reduce emissions is through the use of fuel-efficient driving techniques, which include maintaining steady speeds, avoiding rapid acceleration and braking, and ensuring that the vehicle is well-maintained. Additionally, understanding the impact of vehicle choice on emissions is crucial; for instance, hybrid and electric vehicles typically produce fewer emissions compared to traditional gasoline-powered cars. Furthermore, the use of public transportation, carpooling, and cycling can also significantly reduce the number of vehicles on the road, thereby lowering overall emissions. In Tasmania, where natural beauty and clean air are valued, drivers must be aware of their environmental impact and make conscious choices to reduce emissions. This understanding not only helps in complying with local regulations but also contributes to the broader goal of sustainability.

Understanding the use of mirrors and blind spots is crucial for safe driving, especially in a place like Tasmania where road conditions can vary significantly. When changing lanes or merging, drivers must be aware of their surroundings, which includes checking mirrors and being conscious of blind spots. Blind spots are areas around the vehicle that cannot be seen through mirrors, and they can hide other vehicles, cyclists, or pedestrians. The correct use of mirrors involves not only checking them before making a maneuver but also understanding their limitations. For instance, side mirrors can provide a view of the lane next to you, but they may not capture everything directly behind or in the blind spot. In Tasmania, where rural roads and urban areas coexist, the risk of missing a vehicle in a blind spot can lead to serious accidents. Therefore, drivers must develop a habit of checking mirrors frequently and turning their heads to look over their shoulders when necessary. This question tests the candidate’s ability to apply their knowledge of mirror use and blind spot awareness in a practical scenario, emphasizing the importance of these skills in real-world driving situations.

Understanding the rules regarding turn lanes and bike lanes is crucial for safe driving, especially in urban areas like Tasmania where cyclists share the road with motor vehicles. When approaching an intersection, drivers must be aware of designated turn lanes and how they interact with bike lanes. A common misconception is that drivers can merge into a turn lane without checking for cyclists. This can lead to dangerous situations, particularly if a cyclist is traveling straight in the bike lane while a vehicle is turning left. In Tasmania, it is essential for drivers to signal their intentions well in advance and to yield to any cyclists in the bike lane before making a turn. Additionally, understanding the layout of the road and the placement of bike lanes can help prevent accidents. Drivers should also be aware of the rules regarding the use of bike lanes, as they are typically reserved for cyclists and should not be used for vehicle travel unless specified. This question tests the candidate’s ability to apply their knowledge of these rules in a practical scenario.

Speed limit signs are crucial for maintaining road safety and ensuring that drivers adhere to the regulations set forth by local authorities. In Tasmania, speed limits are typically indicated in kilometers per hour (km/h) and can vary based on the type of road, the presence of schools, and other environmental factors. Understanding the implications of these signs is essential for safe driving. For instance, a speed limit of 50 km/h in urban areas is designed to protect pedestrians and cyclists, while a higher limit on highways allows for efficient travel. However, it is important to recognize that speed limits can change due to road conditions, construction, or other temporary factors. Drivers must remain vigilant and adjust their speed accordingly, even if the posted limit remains unchanged. Additionally, exceeding the speed limit can lead to severe penalties, including fines and demerit points, which can affect a driver’s ability to maintain their permit. Therefore, recognizing and understanding speed limit signs is not just about compliance; it is about ensuring the safety of all road users.

In this scenario, the driver is faced with a situation that requires critical thinking and decision-making skills. The key to understanding this question lies in recognizing the importance of assessing the environment and the potential risks involved in each option. The correct answer, option (a), emphasizes the need for caution and awareness of surrounding traffic conditions. It is crucial for drivers to evaluate their surroundings, especially when approaching intersections or merging lanes, as this can significantly impact safety. Option (b) suggests proceeding without caution, which could lead to dangerous situations, especially if other vehicles are present. Option (c) implies a lack of awareness of the traffic rules, which is essential for safe driving. Lastly, option (d) suggests an overly aggressive approach, which can lead to accidents or conflicts with other road users. The ability to analyze the situation, consider the actions of other drivers, and make informed decisions is vital for safe driving in Tasmania, where road conditions can vary. This question tests the candidate’s ability to apply critical thinking in a real-world driving scenario, ensuring they understand the implications of their choices on road safety.

Driving on wet and slippery roads presents unique challenges that require a nuanced understanding of vehicle dynamics and road safety principles. When roads are wet, the friction between the tires and the road surface decreases, which can lead to reduced control over the vehicle. This is particularly critical in Tasmania, where weather conditions can change rapidly, and drivers must be prepared for sudden rain or wet conditions. One of the key strategies for maintaining control on slippery surfaces is to reduce speed. Slower speeds allow for better reaction times and reduce the likelihood of skidding. Additionally, drivers should increase their following distance to allow for longer stopping distances, as wet roads can significantly extend the time it takes to come to a complete stop. Another important consideration is the use of smooth steering inputs. Abrupt movements can lead to loss of traction, especially when cornering. Drivers should also be aware of areas where water tends to accumulate, such as low-lying spots or areas near drains, as these can be particularly hazardous. Understanding the effects of hydroplaning, where a vehicle’s tires lose contact with the road due to a layer of water, is also crucial. In Tasmania, where winding roads and steep inclines are common, being aware of these factors can help prevent accidents and ensure safer driving in adverse weather conditions.

In Tasmania, effective communication between drivers is crucial for maintaining safety on the roads. One of the key aspects of exchanging information is the use of indicators and brake lights to signal intentions to other road users. For instance, when a driver intends to change lanes or make a turn, using the appropriate indicator allows other drivers to anticipate the movement, thereby reducing the risk of collisions. Additionally, understanding the significance of other drivers’ signals is equally important. If a driver observes a vehicle slowing down without any apparent reason, it could indicate that the driver is preparing to stop or turn. In such cases, maintaining a safe following distance is essential to avoid rear-end collisions. Furthermore, the use of hand signals, especially in situations where vehicle indicators may not be functioning, is a vital skill that all drivers should possess. This question tests the candidate’s ability to interpret and respond to various signaling scenarios, which is a fundamental aspect of safe driving practices in Tasmania.

In this scenario, we need to determine the total distance a driver would cover while navigating a specific route in Tasmania. The route consists of three segments: the first segment is 12 km, the second segment is 15 km, and the third segment is 8 km. To find the total distance, we can use the formula for the sum of distances: $$ D_{total} = D_1 + D_2 + D_3 $$ where: – \( D_1 = 12 \, \text{km} \) – \( D_2 = 15 \, \text{km} \) – \( D_3 = 8 \, \text{km} \) Substituting the values into the equation gives: $$ D_{total} = 12 + 15 + 8 $$ Calculating this step-by-step: 1. First, add \( D_1 \) and \( D_2 \): $$ 12 + 15 = 27 \, \text{km} $$ 2. Next, add \( D_3 \): $$ 27 + 8 = 35 \, \text{km} $$ Thus, the total distance \( D_{total} \) that the driver would cover is 35 km. This calculation is essential for understanding how to plan routes effectively, especially when considering fuel consumption and time management during driving tests in Tasmania.